Page 2 of 4

Pull the string through almost all the way, leaving two to three inches sticking out. Loop the free end under the string just behind the saddle and pull it back toward the end of the guitar:






Pass the free end under the loop, below the back corner of the bridge:

Holding the free end down so it won't climb up over the corner, just pull the string tight. This will lock the string in place very nicely:


Now we can move to the peghead. Pass the string all the way through the tuner hole, leaving just a little slack:



Loop the free end back down over the tuner roller and pass it under itself:


More

1
2
3
4

Back to Index Page