Bent Tools
More very simple
Another amazingly useful tool is this little butane torch. This little guy has a spark lighter and fires up instantly with one hand. Because it's so easy to light the gas consumption is very low. I'm still surprised how many things I get done before time to recharge.
Here's how I use the little torch to mess up some standard tools:
These are regular palette knives I've torched and bent to suit a particular job. I broke the blade off one palette knife and simply soldered it onto a piece of 1/8" diameter steel rod. This is the most handy one, because I can bend it to fit into the craziest places.
Check out these bent items:
#1 and #2 are old files I've bent and sharpened to be bridge plate removal chisels.
#3 is a file I bent and made into a chisel to remove a piece of top reinforcement near the soundhole of a guitar.
#4 is the only one that started out life as a chisel. It's bent at 90 degrees for working inside a guitar to chop out a piece of lining.
#5, #6 and #7 are a good illustration of what you can do with old cheap screwdrivers. I've modified these to be bent chisels. Without even hardening the blades, they're good for doing a critical job before they get dull. I simply sharpen them with a file, and I'm off and running again. I made #5 and #6 so that they cut both on the ends and the edges of the blades and they're different lengths so I could reach inside the F-holes of a severely overbuilt early 70s Gibson F-5 mandolin to reduce the thickness of the tone bars without disassembly.
The others are more modified palette knives. I'm ruthless with palette knives.